Your Position: Home Page >> Tungsten Carbide Knowledge >> Cemented Carbide Cutting Tools >> Cemented Carbide Cutting Tools Technical Information
Four-blade End Mill
Four-blade End Mill
| Processing methods: Side Milling |  |
| Processing methods: slot milling processing |  |
| Cutting material | Aluminum alloy | Cast iron | ||
| Hardness | ||||
| Flute Diameter D | m/min | f(mm/rev) | m/min | f(mm/rev) |
| 3.0 | 45 | 0.025 | ||
| 4.0 | 55 | 0.040 | ||
| 5.0 | 60 | 0.055 | ||
| 6.0 | 60 | 0.075 | ||
| 8.0 | 60 | 0.100 | ||
| 10.0 | 60 | 0.120 | ||
| 12.0 | 60 | 0.160 | ||
| 16.0 | 60 | 0.160 | ||
| 18.0 | 60 | 0.180 | ||
| 20.0 | 60 | 0.180 | ||
| 25.0 | 60 | 0.160 | ||
| Processing methods: slot milling processing | D'<Φ3: D=D' Ad≤0.5D' D'≥Φ3: D=D' Ad≤0.2D' |
|||
| Cutting material | Alloy steel, tool steel, stainless steel | Hardened steel, titanium, high temperature alloys | ||
| Hardness | 38 ~45HRC | 45 ~55HRC | ||
| Flute Diameter D | m/min | f(mm/rev) | m/min | f(mm/rev) |
| 3 | 20 | 0.035 | 15 | 0.025 |
| 4 | 25 | 0.065 | 15 | 0.035 |
| 5 | 25 | 0.085 | 18 | 0.055 |
| 6 | 30 | 0.100 | 18 | 0.075 |
| 8 | 30 | 0.150 | 20 | 0.090 |
| 10 | 30 | 0.180 | 20 | 0.100 |
| 12 | 30 | 0.200 | 20 | 0.100 |
| 16 | 30 | 0.200 | 20 | 0.140 |
| 18 | 30 | 0.200 | 20 | 0.140 |
| 20 | 30 | 0.200 | 20 | 0.140 |
| 25 | 30 | 0.200 | 20 | 0.140 |
| Processing methods: Side Milling | ae<0.2D ap<1.5D | |||
| Cutting material | Alloy steel, tool steel, stainless steel | Hardened steel, titanium, high temperature alloys | ||
| Hardness | 38 ~45HRC | 45 ~55HRC | ||
| Flute Diameter D | m/min | f(mm/rev) | m/min | f(mm/rev) |
| 3 | 20 | 0.025 | 15 | 0.020 |
| 4 | 25 | 0.050 | 15 | 0.030 |
| 5 | 25 | 0.070 | 18 | 0.040 |
| 6 | 30 | 0.090 | 18 | 0.060 |
| 8 | 30 | 0.120 | 20 | 0.075 |
| 10 | 30 | 0.150 | 20 | 0.085 |
| 12 | 30 | 0.170 | 20 | 0.100 |
| 16 | 30 | 0.170 | 20 | 0.120 |
| 18 | 30 | 0.170 | 20 | 0.120 |
| 20 | 30 | 0.170 | 20 | 0.120 |
| 25 | 30 | 0.200 | 20 | 0.120 |
| Processing methods: slot milling processing | D'<Φ3: D=D' Ad≤0.5D' D'≥Φ3: D=D' Ad≤0.2D' |
|||
Chinatungsten Online can provide various sizes and grades of cemented carbide cutting tools, non-standard products are also customized according to customer requirements. Welcome to consult and purchase [email protected], [email protected] .
閩公網安備 35020602000140號