Cemented Carbide Planer Tools

Cemented carbide planer tool geometric parameters are selected by workpiece material, tool material, processing requirements. Table for cemented carbide planer tool reasonable geometric angles recommended values.

Cemented Carbide Planer Tool Reasonable Geometric Angles Recommended Values

Processing Property	Workpiece Material	Planer Tool Material	Rake Angle γ0	Rear Corner α0①	Edge Inclination λs	Main Cutting Edge Angle kr②(°)
Rough Machining	Cast Iron or Brass	W18Cr4V	10~15	7~9	-10~-15	45~75
	Cast Iron or Brass	YG8、YG6	10~13	6~8	-10~-15	45~75
	Steel	W18Cr4V	15~20	5~7	-10~-20	45~75
	Rm<750MPa	YW2、YT15	15~18	4~6	-10~-20	45~75
	Hardened Steel	YG8、YG6X	-15~-10	10~15	-15~-20	10~30
	Aluminum	W18Cr4V	40~45	5~8	-3~-8	10~30
Finish Machining	Cast Iron or Brass	W18Cr4W	-10~0	6~8	5~15	0~45
		YG8、YG6X	-15~-10③	3~5	0~10
		YG8、YG6X	10~20	3~5	0~10
	Steel	W18Cr4V	25~30	5~7	3~15	0~45
	Rm<750MPa	YW2、YG6X	22~28	5~7	5~10	0~45
	Hardened steel	YG8、YG8A	-15~-10	10~20	15~20	10~30
	Aluminum	W18Cr4V	45~50	5~8	-5~0	10~30

①?fine planing, according to according to the flank face grind damper edges. Usually inverted arris angle αol after = -1.5 ° to 0, the chamfer width Bol = 0.1 to 0.5 mm.
②Machine power smaller, less rigid, the main declination election large value; Conversely, the election, small value. The arc transition between the blades of the main blade and vice should be adopted.
③The recommended values are available to choose from, depending on the specific circumstances choose.

The type and purpose of the cemented carbide planer tool

Straight cemented carbide planer tool: Arbor Straight roughing.

The tip portion of the bent neck cemented carbide planer tool: arbor bent backwards under planing force, bending the elastic deformation does not bar the knife, cutting, grooving, and finishing with.

Partial knife: for processing angled flat, beveled, vertical.

The inner bore knife: machining the inner bore surface and the inner slot holes.

Cutter: used for grooving, cutting, planing the steps.

Curved cutter: T shaped groove, the side grooves, and the like.

Forming knife: Process the special shape of the surface. The planer tool blade shape is consistent with the workpiece surface. One time forming.

Elbow the cemented carbide planer tool: the left or right of the tip portion is bent, for cutting grooves.

Plane cemented carbide planer tool: coarse, fine planed with.

The rough cemented carbide planer tool: rough machining surface planer tool is usually powerful planer tool, to improve cutting efficiency.

Fine cemented carbide planer tool: fine machining planer tool is usually wide-bladed form to get the surface of the lower surface roughness value.

The overall carbide planer tool: tip and shank is made of the same material, typically high speed just tool such form.

Welding cemented carbide planer tool: head and shank are welded together by the two materials. The heads generally cemented carbide knife.

The mechanical clamps solid cemented carbide planer tool: head and Arbor for the different materials knife and with the pressure plate bolts fastening the shank.

Used cemented carbide planer tool power planer, hardened steel planer tool, wide-bladed fine planer tool and planer tool.

Chinatungsten Online can provide various sizes and grades of cemented carbide planer tool, non-standard products are also customized according to customer requirements. Welcome to consult and purchase [email protected], [email protected] .

Chinatungsten Wechat

Chinatungsten Microblog