Cemented Carbide Reamers Processing Bending Solutions

Cemented carbide reamers processing hole bending solution (automotive parts hole machining)

Workpiece material:FC30(HS35)	Parts diagram
Processing Machinery: special machine tools
Tools: φ6x190xMT1 (micro-alloy)
Conditions: rotation speed 1050r/min Cutting speed 20m/min Feed rate 0.3mm/r cemented carbide reamers allowance 1mm Cutting fluid Use

Results: Average brazed cemented carbide reamers, about after 50 holes aligned our check processing, found the hole processing the prefabricated holes allowance change, bending, 0.03mm/50mm rods The form of regulation was unable to pass. Switch to rigid good overall cemented carbide reamers, this problem is solved.

Chips made by overall reamer

Summary: Cemented carbide hinge tool having one or a plurality of cutter teeth, for resection has rotary tool for processing the thin metal of the bore surface the reamer or repair holes. cemented carbide reamer in the manufacture of a small diameter, because of brazing, the arbor in a certain extent, the softening can not be avoided, especially during relatively large allowance processing because Arbor soft and often only along the prefabricated holes scroll, cutting not work, so in this case you should use the rigid good overall type cemented carbide reamers.

Chinatungsten Online can provide various sizes and grades of cemented carbide cutting tools, non-standard products are also customized according to customer requirements. Welcome to consult and purchase sales@chinatungsten.com, sales@xiamentungsten.com .