Powder Metallurgy(PM) Products

PM Antifriction Parts

Grade	Chemical Composition (%)								Density G/cm3	Oil % (>/=)	Shin H. (HR)
	Fe	C	C total	Cu	Sn	Zn	Pb	Other
ST1160	B* B	<0.25	<0.5					<3	5.7~6.2	18	30~70
ST1165									6.2~6.6	12	40~60
ST1260	B B	0.25~6	<1					<3	5.7~6.2	18	50~100
ST1265									6.2~6.6	12	60~110
ST1360	B	0.25~6	<1	2~5				<3	5.7~6.2	18	60~110
ST1365									6.2~6.6	12	70~120
ST1460	B		0.5~2	18~22				<3	5.8~6.3	18	50~100
ST1645									6.3~6.7	12	60~110
ST2170	0.5		0.5~2	B	5~7	5~7	2~4	<1.5	6.6~7.2	18	20~50
ST2175									7.2~7.8	12	30~60
ST2265	0.5		0.5~2	B	8~11			<1	6.2~6.8	18	25~55
ST2270									6.8~7.4	12	35~65
ST2365	0.5		0.5~2	B	6~10	<1	3~5	<1	6.3~6.9	18	20~50
Notes	B: Balance; C: Combine Carbon; Density: Oilness; Skin H.: Skin Hardness
We can supply PM Antifriction Parts according with our bluiprint

PM Structural Parts

Grade	Chemical Composition					Density	Tensile	Percentage	Impact	Skin
Grade	Fe	C	Cu	Mo	Other	>/= g/cm3	Strength >/= %	Elongation >/= %	Ductility >/= NPa	Hardness </= HB
STG10-10	B	</=0.1			1.5	6.3	100	3.0	0.05	40
STG10-15						6.8	150	5.0	0.1	50
STG10-20						7.0	200	7.0	0.2	60
STG30-10	B	>0.1-0.4			1.5	6.2	100	1.5	0.05	50
STG30-15						6.5	150	2.0	0.1	60
STG30-20						6.8	200	3.0	0.15	70
STG60-15	B	>0.4-0.7			1.5	6.2	150	1.0	0.05	60
STG60-20						6.5	200	1.5	0.05	70
STG60-25						6.8	250	2.0	0.1	80
STG90-20	B	>0.7-1.0			1.5	6.2	200	0.5	0.03	70
STG90-25						6.5	250	0.5	0.05	80
STG90-30						6.8	300	1.0	0.05	90
STG70CU3-25	B	0.5-0.8	2-4		1.5	6.2	250	0.5	0.03	90
STG70CU3-35						6.5	350	0.5	0.05	100
STG70Cu3-50						6.8	500	0.5	0.05	110
STG60Cu3Mo40	B	0.4-0.7	2-4	0.5-1.0	1.5	6.5	400	0.5	0.05	120
STG60Cu3Mo55	B	0.4-0.7	2-4	0.5-1.0	1.5	6.8	550	0.5	0.05	130
We can supply PM Structural Parts according with your blueprint (above mentioned "B" is balance)