What is Cemented Carbide

Cemented carbide, also called tungsten carbide, is a hard material used in machining tough materials such as carbon steel or stainless steel, as well as in situations where other tools would wear away, such as high-quantity production runs. Most of the time, carbide will leave a better finish on the part, and allow faster machining. Carbide tools can also withstand higher temperatures than standard high speed steel tools.

Cemented carbides are composed of a metal matrix composite where carbide particles act as the aggregate and a metallic binder serves as the matrix. The process of combining the carbide particles with the binder is referred to as sintering or Hot Isostatic Pressing (HIP). During this process the binder eventually will be entering the liquid stage and carbide grains (much higher melting point) remain in the solid stage. As a result of this process the binder is embedding/cementing the carbide grains and thereby creates the metal matrix composite with its distinct material properties. The naturally ductile metal binder serves to offset the characteristic brittle behavior of the carbide ceramic, thus raising its toughness and durability. Such parameters of carbide can be changed significantly within the carbide manufacturer's sphere of influence, primarily determined by grain size, cobalt content, dotation (e.g. alloy carbides) and carbon content.

Synthesis
WC can be prepared by reaction of tungsten metal and carbon at 1400–2000 °C.[3] Other methods include a patented fluid bed process that reacts either tungsten metal or blue WO3 with CO/CO2 mixture and H2 between 900 and 1200 °C.[4] WC can also be produced by heating WO3 with graphite in hydrogen at 670 °C following by carburization in Ar at 1000 °C or directly heating WO3 with graphite at 900 °C.[5] Chemical vapor deposition methods that have been investigated include:
1.reacting tungsten hexachloride with hydrogen, as a reducing agent, and methane, as the source of carbon at 670 °C (1,238 °F)

WCl6 + H2 + CH4 → WC + 6 HCl

2.reacting tungsten hexafluoride with hydrogen, as reducing agent, and methanol, as source of carbon at 350 °C (662 °F)

WF6 + 2 H2 + CH3OH → WC + 6 HF + H2O
a.Chemical properties
There are two well characterized compounds of tungsten and carbon, WC and tungsten semicarbide, W2C. Both compounds may be present in coatings and the proportions can depend on the coating method.
At high temperatures WC decomposes to tungsten and carbon and this can occur during high-temperature thermal spray, e.g., in high velocity oxygen fuel (HVOF) and high energy plasma (HEP) methods.
Oxidation of WC starts at 500–600 °C.[3] It is resistant to acids and is only attacked by hydrofluoric acid/nitric acid (HF/HNO3) mixtures above room temperature.[3] It reacts with fluorine gas at room temperature and chlorine above 400 °C (752 °F) and is unreactive to dry H2 up to its melting point.
b.Physical properties
cemented carbide is high melting, 2,870 °C (5,200 °F), extremely hard (~9 Mohs scale, 1700–2400 Vickers number[8]) with low electrical resistivity (~2×10?7 Ohm·m), comparable with that of some metals (e.g. vanadium 2×10?7 Ohm·m)
WC is readily wetted by both molten nickel and cobalt. Investigation of the phase diagram of the W-C-Co system shows that WC and Co form a pseudo binary eutectic. The phase diagram also shows that there are so-called η-carbides with composition (W,Co)6C that can be formed and the fact that these phases are brittle is the reason why control of the carbon content in WC-Co hard metals is important.

Structure
There are two forms of WC, a hexagonal form, α-WC (hP2, space group P6m2, No. 187),and a cubic high-temperature form, β-WC, which has the rock salt structure.The hexagonal form can be visualized as made up of hexagonally close packed layers of metal atoms with layers lying directly over one another, with carbon atoms filling half the interstices giving both tungsten and carbon a regular trigonal prismatic, 6 coordination.From the unit cell dimensions[13] the following bond lengths can be determined; the distance between the tungsten atoms in a hexagonally packed layer is 291 pm, the shortest distance between tungsten atoms in adjoining layers is 284 pm, and the cemented carbon bond length is 220 pm. The tungsten-carbon bond length is therefore comparable to the single bond in W(CH3)6 (218 pm) in which there is strongly distorted trigonal prismatic coordination of tungsten. Molecular WC has been investigated and this gas phase species has a bond length of 171 pm for 184W12C.